[asterisk-tech] Trixbox outgoing calls

Frans Schneider frans at connection-telecom.com
Thu Oct 18 09:37:56 SAST 2007


Does the calls stop for both PRI and analogue. Do a cat /proc/interrupts
every 2 seconds and see if your cards keep on receiving interrupts, maybe it
is a signaling problem on the PRI, but your analogue should still work then.


Frans

On 10/18/07, Lucky Tladi <lucky.tladi at gmail.com> wrote:
>
> Hi all,
>
> I have just set up trixbox2.0.
>
> I have a Sangoma card and Digium card running
> on that, i can make calls to the analogue and push it
> to my extension, i can also make calls to the PRI
> number and push the call to my extension, however i
> seem to have 2 problems,
>
> 1) After a while, the incoming calls dont seem to work, i keep
> on getting Busy when i dialin. What could be the problem here?
>
> 2) My Outgoing doesnt seem to work as well, i have setup outbound
> route to go out via the ZAp trunk that i created. When i dial out, the
> first
> time i get few rings, then i get the number u have dialled does not exist.
>
> This is what i get in the CLI
>
>
>
>  -- AGI Script recordingcheck completed, returning 0
>     -- Executing NoOp("SIP/1210-0998bef8", "No recording needed") in new
> stack
>     -- Executing GotoIf("SIP/1210-0998bef8", "0?skipoutcid") in new stack
>     -- Executing Set("SIP/1210-0998bef8", "DIAL_TRUNK_OPTIONS=") in new
> stack
>     -- Executing Macro("SIP/1210-0998bef8", "outbound-callerid|1") in new
> stack
>     -- Executing GotoIf("SIP/1210-0998bef8", "1?start") in new stack
>     -- Goto (macro-outbound-callerid,s,3)
>     -- Executing NoOp("SIP/1210-0998bef8", "REALCALLERIDNUM is 1210") in
> new stack
>     -- Executing GotoIf("SIP/1210-0998bef8", "1?normcid") in new stack
>     -- Goto (macro-outbound-callerid,s,9)
>     -- Executing Set("SIP/1210-0998bef8", "USEROUTCID=") in new stack
>     -- Executing Set("SIP/1210-0998bef8", "EMERGENCYCID=") in new stack
>     -- Executing Set("SIP/1210-0998bef8", "TRUNKOUTCID=0117985600") in new
> stack
>     -- Executing GotoIf("SIP/1210-0998bef8", "1?trunkcid") in new stack
>     -- Goto (macro-outbound-callerid,s,16)
>     -- Executing GotoIf("SIP/1210-0998bef8", "0?usercid") in new stack
>     -- Executing Set("SIP/1210-0998bef8", "CALLERID(all)=0117985600") in
> new stack
>     -- Executing GotoIf("SIP/1210-0998bef8", "1?report") in new stack
>     -- Goto (macro-outbound-callerid,s,22)
>     -- Executing NoOp("SIP/1210-0998bef8", "CallerID set to ""
> <0117985600>") in new stack
>     -- Executing GotoIf("SIP/1210-0998bef8", "0?nomax") in new stack
>     -- Executing GotoIf("SIP/1210-0998bef8", "0?chanfull") in new stack
>     -- Executing DeadAGI("SIP/1210-0998bef8", "fixlocalprefix") in new
> stack
>     -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
>     -- AGI Script fixlocalprefix completed, returning 0
>     -- Executing Set("SIP/1210-0998bef8", "OUTNUM=0118068822") in new
> stack
>     -- Executing Set("SIP/1210-0998bef8", "custom=ZAP/g1") in new stack
>     -- Executing GotoIf("SIP/1210-0998bef8", "0?customtrunk") in new stack
>     -- Executing Dial("SIP/1210-0998bef8", "ZAP/g1/0118068822|300|") in
> new stack
>     -- Requested transfer capability: 0x00 - SPEECH
>     -- Called g1/0118068822
>     -- Zap/1-1 is proceeding passing it to SIP/1210-0998bef8
>     -- Zap/1-1 is making progress passing it to SIP/1210-0998bef8
>     -- Hungup 'Zap/1-1'
>
>
> Could anyone point me to the right directions here please.
>
> Regards,
> Lucky
>
>
>
> F-Kay
> -------------------------------------------------------
> Avoid the Gates of Hell.  Use Linux
> _______________________________________________
> asterisk tech mailing list
> tech at asterisk.org.za
> http://www.asterisk.org.za/mailman/listinfo/tech
>



-- 
Regards

Frans Schneider
email: frans at connection-telecom.com

Connection Telecom
Westlake Business Park
Unit 5, Ibis Park
Tokai

DDI: 021 657 5165
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://asterisk.org.za/pipermail/tech/attachments/20071018/052fdc44/attachment.htm 


More information about the tech mailing list